Call Us (08) 9242 5041 | Email: enquiries@arciwelding.com.au

Mine Spec 600 Engine Drive Welder Generator

Original price was: $33,000.00.Current price is: $28,600.00.

Features:

  • Fuel, oil pressure, engine temperature gauges and hour meter.
  • 43 horespower, liquid-cooled, 4 cylinder Perkins engine, includes automatic engine idler for greater fuel economy and reduced noise
  • 52 litre fuel tank for 8 hours running at maximum RPM.
  • Sound rating no load 76dBA @ 7 metres, loaded 81dBA @ 7 metres
Category:

Description

The Mine Spec 600 Engine Drive Welder Generator designed for the Mining and Construction Industries.

The Mine spec 600 delivers value for money with high duty cycle performance of 500 amps @ 60% duty cycle, 20kVA auxiliary AC power with both 240V and 415V outlets and the latest safety features. Fitted with Perkins 404D-22T Turbo diesel engine, Stamford generator and Yunda DC welding inverter.

The advanced technology Yunda DC inverter delivers superior welding performance with easy arc striking, smooth arc characteristics, low spatter and excellent weld appearance. All printed circuit boards potted in resin and encapsulated to prevent exposure to harmful environments.

The Mine spec 600 features five process modes with digital volt/amp meters.

  • MMA
  • MMA Cellulosic
  • Air Arc Gouging
  • DC TIG
  • MIG / Constant Voltage Wire

MMA for General Purpose and Low Hydrogen MMA electrode welding.
MMA Cellulosic is optimised for Cellulosic MMA electrode welding.

Hot Start and Arc Force can be adjusted in either MMA or MMA Cellulosic modes.
Air Arc Gouging is optimised to run up to 8mm carbon rods and Strike/Re Strike performance is enhanced by optimised waveform design and VRD response time

DC TIG welding with Lift Arc ignition and gas solenoid valve for optimal control and minimal gas loss. Constant Voltage Wire is
optimised with adjustable inductance for running flux cored wires.
MIG welding with the unique RWS wire feeder, makes it possible to weld Pulse MIG, Double Pulse MIG, Synergic MIG, Manual MIG and MMA from wire feeder.

MINE SPEC 600 Engine drive welder generator Features

  • Emergency engine stop button located at eye level to quickly shut Mine spec 600 down in case of emergency.
  • VRD Voltage Reduction Device lowers the voltage in CC MMA and CC air arc gouging modes to below
  • 12 volts in less than 300 milliseconds.
  • Output at welding terminals controlled by electronic contactor with on/off switch.
  • Stainless steel enclosure.
  • Lockable dual pole battery isolation selector for safer maintenance, note: can only be locked in off position.
  • RCD protection for auxiliary AC power outlets.
  • Auxiliary AC power with two 240 Volt single phase and one 415Volt IP66 rated outlets
  • Can be isolated electrically by switching off circuit breakers behind bolted panel.
  • Weight with fuel/oil/coolant 700Kgs
  • Internal wiring looms are encased in conduit with rubber boots fitted to avoid mechanical wear and damage.
  • Drip tray / Roll cage that will contain all liquids used in engine.
  • IP23 case enclosure.

mine spec 600 Information Sheet

SPECIAL PRICE! One only – Includes roll cage!

Additional information

Weight 700 kg

Reviews

There are no reviews yet.

Be the first to review “Mine Spec 600 Engine Drive Welder Generator”
Go to Top