Description
Kemppi MinarcMig 220 Auto MIG Welder At 14.2 kg, portable MIG/MAG welding machine providing 220 Amp with a 20% duty cycle from a 16 A single-phase mains supply.
Manual and synergic welding options available. Compatible with a wide range of materials, including steel (Fe), stainless steel (Ss), aluminum (Al), and CuSi brazing filler wires.
A 3-meter welding torch with an ergonomic torch handle, cable set, and carrying strap included. This model is specifically for the Australian market due to the different mains plug fitted and VRD active.
Technical data
- Mains connection voltage: 230 V ±15 %
- Mains connection phases: 1~50/60 Hz
- Mains connection cable type: 3G, H07RN-F
- Mains connection cable size: 1.5 mm²
- Rated maximum input power [S1max]: 7 kVA
- Mains fuse: 15 A
- Mains fuse type: gG
- Idle state power consumption [P1idle]: 12 W
- Output, duty cycle % at rated max. current, MIG: 20 %
- Output at +40 °C, rated max current, MIG: 220 A
- Output at +40 °C, 60% MIG 160 A
- Output at +40 °C, 100% MIG 120 A
- Power factor at rated maximum current: [λ] 0.99
- Efficiency at rated maximum current: [η] 84 %
- EMC class: A
- Wire feed mechanism: Single-motor, 2-roll
- Maximum wire spool weight: 5 kg
- Maximum wire spool diameter: 200 mm
- Maximum shielding gas pressure: 0.5 MPa
- Degree of protection: (fully installed) IP23\
- External dimensions: length 450 mm x 227mm Width x 368mm Height
- Weight without accessories: 14.2 kg
- Standards: IEC 60974-1, -5, -10, IEC 61000-3-12, AS 60974.1
