Call Us (08) 9242 5041 | Email: enquiries@arciwelding.com.au

Unimig Razor 200 AC/DC Bundle KP11094

$2,349.00

2 in stock

MACHINE SPECIFICATIONS

  • PRIMARY INPUT VOLTAGE: 240V Single Phase
  • SUPPLY PLUG: 10 AMP
  • Ieff (A): 9.8
  • RATED OUTPUT: 5-200A
  • NO LOAD VOLTAGE (V): 65
  • PROTECTION CLASS: IP23S
  • INSULATION CLASS: H
  • MINIMUM GENERATOR (kVA): 9.0
  • DINSE CONNECTOR: 35/50
  • STANDARD: AS/NZ60974-
  • SUITABLE MATERIAL: TIG: Aluminium, Magnesium, Zinc Alloys, Mild Steel, Stainless Steel, Copper, Silicon Bronze, Titanium MMA: Mild Steel, Stainless Steel, Cast Iron
  • WARRANTY (Years): 5

TIG SPECIFICATIONS

  • TIG FUNCTION TYPE: AC/DC HF TIG & AC/DC Pulse
  • TIG WELDING CURRENT RANGE: 5-200A
  • TIG DUTY CYCLE @ 40°C: 20% @ 200A, 60% @ 115A, 100% @ 90A
  • TIG WELDING THICKNESS RANGE: 1-8mm

STICK SPECIFICATIONS

  • STICK WELDING CURRENT RANGE: 20-160A
  • STICK DUTY CYCLE @ 40°C: 15% @ 160A, 60% @ 80A, 100% @ 62A
  • STICK ELECTRODE RANGE: 2.5-4.0mm
  • STICK WELDING THICKNESS RANGE: 2-10mm

2 in stock

Category:

Description

The Unimig Razor 200 AC/DC Bundle KP11094 TIG Welder will give you incredible results from start to finish with this professional-grade TIG welder. Effortlessly weld any metal with the high-frequency AC/DC TIG with the ultimate combination of AC and DC available with Mixed Arc settings. Switch your AC welds to suit your needs with the choice of three waveforms

HD Backlit Interface

This next generation interface panel is bright and easy to read in any environment.

Power Factor Correction (PFC)

PFC gives you maximum electrical efficiency. It automatically compensates for any voltage fluctuation, and PFC is also designed to be generator friendly.

10Amp Plug

A 10 AMP power plug can be used on any domestic outlet. It’s perfect for the DIY home handyman or the professional welder looking for a machine that can be used almost anywhere.

AC/DC

Weld every kind of metal. With the ability to run on an Alternating Current, you’re able to weld aluminium as effortlessly as mild and stainless steels.

High-Frequency TIG

Maximise your results from start to finish. A high-frequency torch can start an arc without contacting the workpiece, reducing the risk of contaminating the tungsten or the weld. It also means you get access to the entire TIG weld cycle, including pre- and post-gas and up and down slope parameters.

Multiple AC Waveforms

Completely customise your aluminium welds. Switch between Sine, Square, and Triangle waves to change the arc characteristics, bead profile, and penetration to suit your weld.

Mixed AC/DC

Experience the best of both worlds. Mixed AC/DC combines the efficiency of AC and the penetration of DC- TIG in one weld. With it, you get faster welding speeds, better penetration, a faster weld puddle on cold workpieces, and you can weld thicker materials.

Pulse TIG

Minimise the heat input without compromising on any of the penetration. Alternating between a peak and base current reduces the amount of heat input and focuses the arc, perfect for sheet metals and out-of-position welding.

Foot Control Ready

The perfect accessory, easily adjust your amperage to suit every weld as you go without disrupting your torch movement.

Smart Fan

Smart Fan diminishes noise, saves power, helps reduce energy costs, and minimises the number of contaminants being pulled through the machine.

Advanced MMA Features

The Unimig Razor 200 AC/DC features adjustable Arc Force and Hot Start functionality. These features are designed for improving weld quality and ease of use.

Unimig Razor 200 AC/DC Bundle Contents

  • RAZOR TIG 200 AC/DC (U12002K)
  • Wired Foot Pedal (U51017)
  • T2 TIG Torch Consumable Starter Kit (U42005)
  • HYPERTIG 5356 Aluminium TIG Rods 2.4mm 1kg (AT5356-2.4-1)
  • HYPERTIG 316 Stainless Steel TIG Rods 1.6mm 1kg (TI316L-1.6-1)
  • ROGUE TIG Welding Gloves (UM-S-TG1XL)

Title

Go to Top