Description
Vio-Flux High Activity Flux Paste is an acid-based flux for use with stainless steel, monel, inconel, high-chrome alloys, nickel, copper, brass, ferrous alloys, soft metals, and many more. The blend of acids used allow this flux to become active at room temperature, exerting a strong scavenging action to remove oxide coatings and other impurities, producing clean, strong joints.
Application
1. Heat the flux (60oC to 82oC) slowly to reduce spatter and excess bubbling. Chipping or grinding is not necessary.
2. Remove all greases, oils, and contaminants from the surface to be brazed.
3. Apply to the joint by dipping, swabbing, or by brush.
4. Activate the flux by heat via torch, induction, or other means.
5. Feed the braze alloy into the joint, unless a brazing preform is already in place.
6. Residues may be cleaned using hot water (approx. 60oC) for best results.
