An Exothermic Lance Handle is necessary for the safe operation of a Thermic Lance. This Handle can be adapted to suit 12mm, 16mm & 19mm Thermic Lances.

It has a built-in Flash/Slag Arrestor, which does not restrict the volume of Oxygen that is required to operate the Thermic Lance. The new design Handle now has a heavier Locking Nut to allow extra Hand-Tighten pressure on securing & sealing the Lance into position.

Also, spanner grooves has been machined in, if the operator is fatigued and does not have to rely on Hand-Tightening alone.

Exothermic Lance Handle Details

  • This Handle should only be used with minimum 10mm I.D. Oxygen Hose with standard 5/8″ UNF Fittings
  • Recommended Operating Pressure : 420kpa (60psi)    Do Not Exceed 600kpa (85psi)
  • If extra Oxygen Flash-Back Arrestors are used, please ensure they are High-Volume Arrestors, as the Thermic Lance requires sufficient volume to operate efficiently.