Description

Inside/Outside Angle Magnets hold stock from the outside, leaving clearance for inside welds, or hold stock from the inside for outside welds.

  • Hold and position sheet metal, round pipes, square, angled or flat stock.
  • The Inside / Outside Angle Magnets are constructed from two independent rectangular magnets for consistent, undiminished magnetic force when both sides are attached to workpieces.
  • Use mounting holes to link two magnets together for use as fixturing elements.
  • Use hex hole on magnet for breakaway leverage.

Inside/Outside Angle Magnets Product Details

MLD350 – Twin pack of MLD300 & MLD500

MLD300

  • Dimensions: 75 x 52 x 14mm
  • Angle: 90 degree
  • Magnetic pull force: 9kg

MLD500

  • Dimensions: 125 x 85 x 18mm
  • Angle: 90 degree
  • Magnetic pull force: 15kg

MST327 Corner magnet

Create 90º corners by holding from the outside, providing you with an unobstructed area for inside tack welds.
One side corner “relief” provides clearance for tall lips.
Use the outer edges of the Corner Magnet for setting up materials at 60º.

  • Twin pack
  • 84 x 96 x 15mm
  • Magnetic pull force: 12kg